Emergency Lighting Control Module (ELCM) / Power-Fail Extended Lighting System

  For the traditional emergency lighting product, you can not have the normally lighting function and the emergency lighting function at the same time, not to mention to the automatic dimming lighting product. In the past, emergency lighting products are always at 'OFF' mode while the electric system is working. And they could only light up automatically after the power failure. These kind products are always heavy and have short lifetime because of its energy storage module- lead acid battery.  For normally home use lighting system, products light up normally while the electric system working. But if the power fails, the environment will suddenly become dark, unless you have set up the emergency lighting system in your place (normally speaking, emergency lighting system will be set up in the public indoor area) . Darkness makes people fear, even dangerous. 

 To provide a cheap, light-weight and reliable emergency lighting system, we have developed a new emergency lighting control module system (or you can call it 'power-fail extended lighting system'). This product combines the traditional lighting system and the emergency lighting system. You can use it as the normal lighting product. If the power fails, the system will change to light up at 50% output automatically. The 50% lighting output can provide you more than one hour to leave the room after confirming if the environment is safe.

  The battery system can be changed to work lasted for 60, 90, 120 minutes or more during the power failure period.

  Now we can provide 6W, 8W, 10W and 12W solutions. If you have interest in these kind products, please feel free and contact us.

Specifications

INPUT    : 100~240VAC

Normal Output  : 6W Lighting

Emergency Output    : 3W

Power Consumption : 6~10W(charging state)

Battery: Li-PO, 3.7V, 18650 pack

                Square Down Light                                                         5" Down Light

           6"  Down Light