BW uses cosmetic-grade synthetic wax. Through the modification of nanomaterials, it improves the adhesion between the wax and the car body. The formula of 13 materials and the combination of cross-field technologies provide a smooth but not sticky touch. For more information, please refer to FB[東準汽美材料] 或 [達可特汽美材料] 。 （屋檐水滴，慢速錄影）

The dancing wax - K is the company's first private brand product besides electronic related products. Welcome to inquire!! 相關影片: 搜尋 YOUTUBE 影片 東準汽美材料水舞蠟

It's a simple, reliable, funny and has more than 20 years storage time battery. Light weight, for emergency environment use, for lighting or cell phone charge...... Add the water, try it! 0.5W 5630 LED

Emergency Lighting Control Module (ELCM) / Power-Fail Extended Lighting System For the traditional emergency lighting product, you can not have the normally lighting function and the emergency lighting function at the same time, not to mention to the automatic dimming lighting product. In the past, emergency lighting products are always at 'OFF' mode while the electric system is working. And they could only light up automatically after the power failure. These kind products are always hea...

Self-discharge Test Report - MPB-02 Less than 6% one year self-discharge rate! (from 2013.08.22 to 2014.08.29, totally 373 days) MPB series product has a very low self-discharge rate. To verify the rate of self-discharge , we prepared 10 sets from 2013.08.22 to 2014.08.29 and placing there at the turn-off mode. Every 7 to 10 days, we measured the voltage of the same device(MPB-02) and recorded it. The steps of measurement are listed as below, and the multi-meter is KILTER 767. We always use ...

Emergency Lighting Control Module (ELCM) / Power-Fail Extended Lighting System For the traditional emergency lighting product, you can not have the normally lighting function and the emergency lighting function at the same time, not to mention to the automatic dimming lighting product. In the past, emergency lighting products are always at 'OFF' mode while the electric system is working. And they could only light up automatically after the power failure. These kind products are always heavy a...

How to change the fuseof MPB Products? 1.Pry the fuse open with a flat-head screwdriver. (用一字起子將保險絲撬開) 2.Remove the damaged (burned) fuse. (以手或夾子將已燒毀的保險絲移除) or 3.Insert the new fuse with the same specifications. (插入相同規格的保險絲20A) 4.Check the fuse inserted. (確認已經插入後即可) ...

What's the cranking current of your car? A starter motor requires a very high current to crank the engine. For example, one of the starter motor power of AUDI 2.0L gasoline engine is designed as 1.1KW. Generally speaking, we just provide this starter only 92A/12VDC to start a car. Right? Certainly not. This starter motor is connected to flying wheel. In facts, the resistance of the flying wheel bearing, the electric equipments in the car, the compression ratio of cylinders, compression rings,...

Self-discharge Test Report - MPB-02 Less than 6% one year self-discharge rate! (from 2013.08.22 to 2014.08.29, totally 373 days) MPB series product has a very low self-discharge rate. To verify the rate of self-discharge , we prepared 10 sets from 2013.08.22 to 2014.08.29 and placing there at the turn-off mode. Every 7 to 10 days, we measured the voltage of the same device(MPB-02) and recorded it. The steps of measurement are listed as below, and the multi-meter is KILTER 767. We always use ...